Upgrading the software
USB upgrade
You can upgrade the software by using USB Memory Stick.
1 Connect your USB Memory Stick with the upgrade file to the USB terminal on the side of your TV.
2 Use ▲▼ to select Software update, then press OK.
3 Use ▲▼ to select USB, then press OK.
4 Use ▲▼ to select the desired Update file.
5 Use ◄► to select Yes, then press OK.
6 Read the
Software update is in progress. Please wait.
Do not remove the USB storage device or turn the TV off while upgrade is in progress.
Update your TV with new software:
7 When the software upgrade is completed, press 
to set the unit to go into Standby mode, then remove the USB Memory Stick.
8 Unplug the AC power cord for a few seconds from AC outlet and plug it again.
9 Press 
again to Turn the unit On.
•The TV starts up with the new software.
For further assistance, please contact Call Center.
Network update
You can update the software by connecting the unit to the Internet.
1 Use ▲▼ to select Software update, then press OK.
2 Use ▲▼ to select Network, then press OK.
3 Use ◄► to select Yes, then press OK.
• This unit will then start checking for the latest firmware version.
4 Confirmation message will appear.
Use ◄► to select Yes, then press OK.
• The unit will start downloading the latest firmware version.
• The unit will start updating the firmware version.
• It may take a while to complete the updating.
5 When the software update is complete, press . to make sure the unit goes to Standby mode.
6 Unplug the AC power cord for a few seconds from AC outlet and plug it again.
44 English
7 Press 
again to Turn the unit On.
•The TV starts up with the new software.
For further assistance, please contact Call Center.
Note
•In order to update software via the Internet, you must connect the unit to the Internet and set up necessary settings. Network settings assistant ➠ p.40 Network ➠ p.40
•Please do not unplug the AC power cord or Ethernet cable while executing the Network update.
•All settings will remain the same even if you update the software version.
•The version of Net service will also be updated if newer version of Net service is available when updating the firmware.
Automatically check for latest software
This function lets you know if the latest software is available while the unit is connected to the Internet.
1 Use ▲▼ to select Automatically check for latest software, then press OK.
2 Use ▲▼ to select the desired option, then press OK.
Off | Disable automatically check for latest software. | |
|
| |
On | A message will appear if there is the latest software on the | |
network server. | ||
|
Netflix deactivation
Displays the deactivation setting for Netflix.
1 Use ▲▼ to select Netflix deactivation, then press OK. 2 Use ▲▼ to select the desired option, then press OK.
Yes
No
Netflix ESN
Displays the ESN information.
1 Use ▲▼ to select Netflix ESN, then press OK.
•Displays the ESN (Electronic Serial Number) to get any services from Netflix.
VUDU deactivation
Displays the deactivation setting for VUDU.
1 Use ▲▼ to select VUDU deactivation, then press OK. 2 Use ▲▼ to select the desired option, then press OK.
Yes
No
YouTube deactivation
Displays the deactivation setting for YouTube.
1 Use ▲▼ to select YouTube deactivation, then press OK. 2 Use ▲▼ to select the desired option, then press OK.
Yes
No
