Connect Accessory Devices
Using HDMI
1Set Top Box to TV
Pb
CABLE/
ANTENNA
HDMI
R VIDEO
AConnect RF cable from wall to input at back of the cable box.
BConnect cable box to TV using HDMI cable.
Note: If the accessory device has DVI output only, use a DVI to HDMI adapter cable to connect to the HDMI connector. You need to also connect the audio cable to L and R AUDIO jacks. Next, go to Menu=>Setup=>Source=>Analog Audio In=> and select HDMI.
CPress AV button to select HDMI external channel.
Using RF Cable
AConnect RF cable from wall to input at the back of the cable box.
BUse second RF cable to connect the cable box to the TV's antenna input. This connection gives mono sound. For stereo sound use also composite audio/video connection (Refer to panel 3).
Set output switch on
In some cases, cable box will automatically tune to channel 3 or 4. Just change channels on the set top box to view the program.
2DVD Player or DVD Recorder to TV
Pb Y
CABLE/
ANTENNA
HDMI
R VIDEO
Using HDMI
AConnect DVD player/DVD recorder to the TV using HDMI cable.
BTurn on TV and DVD Player/DVD recorder. Press the AV button on remote control to tune to the video supplied by HDMI.
Insert a prerecorded DVD into DVD player/DVD recorder and press PLAY to verify correct connection.
3DVD Player or DVD Recorder to TV
Using Component Video Input (YPbPr)
A
B
Insert Component Video connectors into their corresponding jacks on both DVD player/DVD recorder and TV (Y, Pb and Pr).
C
COMP VIDEO | VIDEO | AUDIO | |
Y | Pb |
| R |
| OUT | OUT | OUT |
| Pr |
| L |
Connect red/white audio cables into the audio output jacks on DVD player/ DVD recorder and audio AV inputs on TV.
Turn on TV and DVD player/DVD recorder. Press AV on remote control until the connected source appears on TV screen.
Insert a
21
Downloaded from www.Manualslib.com manuals search engine
