Philips 55PP925 manual Convergence Converge RED/BLUE, Enter main menu Enter Picture menu

CONVERGENCE (CONVERGE RED/BLUE)

Due to the influence of magnetic fields and changes in the position of the TV, the red, blue, and green screen colours may not align properly. The result is that red or blue colours may appear around the edges of images. If various images on the entire picture have red outlines, adjust CONVERGE RED. Then if any red outlines remain, adjust MULTIPOINT RED. If various images on the entire picture have blue outlines, adjust CONVERGE BLUE. Then if any blue outlines remain, adjust MULTIPOINT BLUE. Use UNDO MULTIPOINT if you want to restore the picture screen to the way it was before you made Multipoint adjustments.

Note

•After turning the TV set on, allow it to warm up for 15 minutes before adjusting Convergence.

•If you adjust Convergence and then change your signal source from PAL to NTSC or from NTSC to PAL, you may need to readjust Convergence for the new signal source.

MENU

1. Enter main menu.

2. Enter PICTURE menu.

3.Press button repeatedly until CONVERGENCE is selected.

4. Enter CONVERGENCE

menu.

5. Enter CONVERGE

RED mode.

6. Adjust cross image until colour outline is gone.

OSD

PICTURE
• HUE	CONVERGE RED
• COLOUR TEMP	CONVERGE BLUE
• NR	MULTIPOINT RED

•INCR. PICTURE MULTIPOINT BLUE

• CONVERGENCE		SAVE MULTIPOINT
PICTURE
	CONVERGENCE
	• CONVERGE RED	•
	• CONVERGE BLUE

• MULTIPOINT RED

• MULTIPOINT BLUE

• SAVE MULTIPOINT

•

•CONVERGE RED

				7. Exit menu from screen.			• CONVERGE RED
Note: You can adjust CONVERGE BLUE similar to the way you would adjust
CONVERGE RED.
PICTURE			PICTURE
	• HUE
		CONVERGE RED		CONVERGENCE
	• COLOUR TEMP	CONVERGE BLUE		• CONVERGE RED
	• NR	MULTIPOINT RED		• CONVERGE BLUE	•
	• INCR. PICTURE	MULTIPOINT BLUE		• MULTIPOINT RED
	• CONVERGENCE	SAVE MULTIPOINT		•▲ MULTIPOINT BLUE	É
				▲
				• SAVE MULTIPOINT		• CONVERGE BLUE	• CONVERGE BLUE

•

20