14
4Turn Razor Head Assembly over so that underside is exposed.
5Press down and turn wheel of frame counterclockwise.
6Remove the frame and brush clean.
7 Remove and clean one cutter and head at a time.
• Be careful not to mix up cutters and heads.They are a matched set and if interchanged, it will greatly affect shaving performance.
8Separate the cutter from the head.
9Only brush the cutter in an upward motion. Use the
short bristled side of the brush.
10Brush the slots of the razor head.
For optimum performance, razor cutters and heads should be cleaned in a degreasing liquid (e.g. Norelco Razor Cleaner model RC1776 or alcohol) and lubricated with Norelco Razor Lubricant, model AL80, or one drop
