15
11 Replace the cutter and razor head in the Head Assembly.
12 Repeat the process for the other two razor heads
(cutters and heads).
13 Replace the frame.
14 Press down and turn the wheel clockwise until it locks
into place.
15 Replace the Razor Head Assembly back on razor.
After Each Use:Trimmer
1Turn razor OFF.
2Push Trimmer Slide Switch up to pop up Trimmer.
3Clean Trimmer with the brush after each use.
4Lubricate the Trimmer teeth with Norelco Razor
Lubricant (model AL80),or with one drop of mineral oil
every 6 months.
5Close Trimmer by sliding Trimmer switch down.