Philips 608669 manual Machine Setup, Installing Vacuum Hose/Wand, Operation, Home Find, Go To

OPERATION

4.Secure power cord with factory-installed cord clamp, located on handle (Figure 2).

FIG. 2

5.Wrap power cord around quick release hook and the lower handle hook.

INSTALLING VACUUM HOSE/WAND

1.Slide hose cuff over spout on bag compartment lid and wand into base cuff as shown. Snap wand into retainer clip (Figure 3).

2.Store crevice tool on carrying handle (Figure 3).

Wand

FIG. 4

2.Adjust brush height. Turn brush height adjustment dial to desired setting as follows (Figure 5):

Brush Height Settings: 1–2 Short Carpet Pile

3–4 Medium Carpet Pile

5–6 High Carpet Pile

Spout

Base Cuff

FIG. 3

MACHINE SETUP

WARNING: Do Not Operate With Damaged Power Cord. Do Not Modify Plug. Unplug Power Cord Before Servicing Machine

1.Install filter bag (pre–installed). Depress latch on lid to open bag compartment (Figure 4).

Contact distributor for optional cloth bag #900034.

NOTE: The machine will not operate without a filter bag in place. The protective vacuum motor lockout device will automatically sense when a bag is not installed.

FIG. 5

6

Home Find...

Go To..

ViperR

Vacuum Cleaner (06–03)