ENGLISH 9.
INSERTING THE FIRST CARTRIDGE
1Take one lotion or gel cartridge.Take the connector supplied and remove it from the little bag. Push it into the plastic cap of cartridge until it locks into position with a click.
2Push the release slide on the back of razor downwards and open the cover of the cartridge compartment.
3Slide the cartridge with the connector in place into the razor. It only fits properly if the white side of the connector is pointing upwards. Close the cover.
4Press the applicator button a few times until the Nivea for Men shaving lotion or gel appears.The razor is now ready for use.
REPLACING CARTRIDGES
1Open back cover of razor.
2Remove empty cartridge, pull out and save the connector. DO NOT discard the connector.
3Rinse out cartridge compartment with water before replacing cartridge. Air dry thoroughly.
