13.
ENGLISH
4Shake off excess water and close Razor Head Assembly.
BOnce A Week:Charging Stand
1Unplug the charging stand.
2Clean the charging stand with a moist cloth.
BEvery Two Months:Razor Heads
IMPORTANT: Do Not interchange the cutters and
combs.They are a matched set and if interchanged may
adversely affect shaving performance until cutters reseat
themselves.Therefore,remove, clean and replace each
set individually.
1Switch razor OFF.
2Press the Razor Head Release Button located under
razor heads on front side of Razor.
3Remove the Razor Head Assembly and clean the
razor heads and hair chamber by running under hot
water.Be sure water is not too hot so as to cause
burns or scalding.
4While holding Razor Head Assembly in one hand,press
center wheel down while turning counterclockwise to
release and lift out frame.Set frame aside.