14.ENGLISH
5 Remove one cutter/comb, at a time, out of frame.
6 Cutter should be held with cutters facing up and brushed in an upward motion. Clean razor comb with long bristles of brush in a circular motion.
7For optimum performance, razor cutters and combs should be cleaned in a degreasing liquid (e.g., Norelco Razor Cleaner, model RC1776, or alcohol) and lubricated with Norelco Razor Lubricant, model AL80, or one drop of mineral oil (in the center of the head).
8 While holding Razor Head Assembly in one hand, gently place one cutter/comb back into Assembly.
9Repeat procedure for other two cutting heads.
10Replace frame back into Razor Head Assembly. While
pressing down, turn wheel clockwise to lock frame into place.
11 Press Razor Head Assembly back on razor housing.
