14

General notes

- Depending on your TV and other equipment you wish to connect, there
are various ways you could connect the player. Possible connections are
shown in the following drawings.
- Please refer to the manuals of your TV, VCR, Stereo System or other
devices as necessary to make the best connections.
- Do not connect your DVD-player via your VCR. The video quality could be
distorted by the copy protection system.
- For better sound reproduction, connect the player’s audio out jacksto the
audio in jacks of your amplifier, receiver, stereo or A/V equipment. See
‘Connecting to optional equipment’.
Caution: Do not connect the player’s audio out jack to the phono
in jack of your audio system.

Connecting to a TV

●Connect the SCART to the corresponding connector on the TV using the
SCART cable supplied (A).
If your TV is not equipped with a SCART you can select one of the following
alternative connections:
S-Video (Y/C) connection
1Connect the S-Video jack on the DVD-player to the S-Video in jack on
the TV using an optional S-Video cable (B).
2Connect the audio Left and Right out jacks to the audio left/right in jacks
on the TV (D).
Video CVBS connection
1Connect the Video out (CVBS) jack to the video in jack on the TV using
the video cable supplied (C).
2Connect the audio Left and Right out jacks to the audio left/right in jacks
on the TV (D).
Preparation
PREPARATION
L
R(CVBS)
VIDEO OUT
DIG OUT AUDIO OUT S-VIDEO OUT
OPT OUT
DIGITAL AUDIO OUT
PCM/MPEG2/AC3/DTS
STEREO OUT
(Y/C)
I
AUX/VCR
IN
II
TV OUT
MAINS
TV
CB A
D