7610_16_17.qxd | 6/6/05 12:39 PM Page 17 | (Zwart plate) |
|
|
|
C |
ENGLISH 17
◗The set will only fit into the Razor Head Assembly so that the ‘wings’ on the comb fit within the brackets located towards the center of the assembly.
◗Make sure tat the two pointy edges of the head fit exactly into the recesses.
7Repeat the process for the other two sets of cutters and combs.
8Replace the frame.
9Press down (1) and turn wheel clockwise
(2)until it locks into place.
10Replace the Razor Head Assembly back on razor.
◗If the razor heads have been properly inserted, a shiny circle is visible in the middle of the razor head assembly.
Once A Month: Razor Heads
For optimum performance, razor cutters and combs should be cleaned in a degreasing liquid (e.g. Norelco Razor Cleaner, Model RC 1776, or alcohol) and lubricated with Norelco Razor Lubricant, model AL80, or one drop of mineral oil (in the center of the head).This helps prevent wear of the shaving heads.
Downloaded from www.Manualslib.com manuals search engine
