7735X DFU 11/19/03 4:29 PM Page 13 | (Black plate) |
ENGLISH 13
C
2
C
1 
Inserting the First Cartridge
◗One connector is supplied for use with all four cartridges. Do not throw connector away when you replace an empty connector.
◗For hygienic reasons, it is advised that you use a new connector when you start using a new set of replacement cartridges.
◗Remove the shaving lotion/gel cartridge from the razor when you are not going to use the razor for more than one week.
1Take one lotion or gel cartridge.Take the connector supplied and remove it from the plastic bag. Push it into the plastic cap of cartridge until it locks into position with a click.
2Press the release button on the back of razor and open the cover of the cartridge compartment.
C 3 Slide the cartridge with the connector in place into the razor. It only fits properly if the white side of the connector is pointing upwards. Close the cover.
4Press the applicator button a few times until the Nivea for Men shaving lotion or gel appears in the small hole located on razor head assembly.The razor is now ready for use.
