Philips 7737X Shaving Unit Quick Clean After Every Shave, Cleaning3 Replace razor head assembly

7735X DFU 11/19/03 4:29 PM Page 19 (Black plate)

ENGLISH 19

Cleaning3 Replace razor head assembly.

Important

◗Always switch Razor OFF and remove from charging stand before cleaning.

◗Always store Razor with Protective Razor Head Cap on shaving heads.

◗Never clean, remove or replace head assembly while motor is on.

◗Do not apply pressure to combs. Do not touch razor heads with hard objects as this may dent or damage precision-made slotted combs.

◗Do not use razor if combs are damaged or broken. Facial injury may occur.

◗Never dry the shaving unit with a towel or tissue as this may damage the razor heads.

Shaving Unit: Quick Clean After Every Shave

C

1Make sure the razor is switched on.

2Keep the Razor Head Assembly closed.

3Rinse the Razor Head Assembly and the hair chamber under a hot tap by letting the water run through the openings below the assembly for at least 30 seconds.

BE CAREFUL TO TEST WATER FIRST SO AS NOT TO BURN OR SCALD HANDS.

4Shake off excess water.