ENGLISH 25ENGLISH24
After Each Use: Trimmer
1Turn razor OFF.
2Push down spring-release trimmer switch.
C3Clean trimmer with the brush every time
you use it.
C4Lubricatethe trimmer teeth with Philips
NorelcoRazor Lubricant (model AL80) or
withone drop ofmineral oil every6 months.
5Close trimmer by pressing trimmer down.
Thisrazor and Jet Clean System have no other user-
serviceable parts. Any other service should be
performed by the Philips Norelco Service Location.
Cleaning the Jet Clean Canister
Foroptimal performance of the Jet Clean System,it
isrecommended that you empty the cleaning
solutioncanister and thoroughlyrinse the canister
clean every2 weeks.
1Place the Jet Clean System on a flat,level
surface.
C2Simultaneouslypress the buttons located on
bothsides of the Jet Clean System (1)and
liftthe appliance off the Jet Clean canister (2).
Always remove appliance from canister by lifting
straight up. Do not tilt Jet Clean System.
C2Press the Razor Head Release Button,flip
open the Razor Head Assembly.
C3Clean inside razor heads and hair chamber
by running under hot water.
C4Clean outside of Razor Head Assembly by
running under hot water.
5Close the Razor Head Assembly and shake
off excess water.
C6Open Razor Head assembly again and
leave open to air dry.
NOTE: Do not wipe or dry the shaving heads
with a towel or tissue.This could damage the
shaving heads.
C7If the shaving unit becomes detached from
the razor,you can easily reattach it.
8You may also clean the hair chamber
without water by using the supplied brush.