Philips 8040X manual Razor Head Assembly Once a Month

24ENGLISH

5You can store the razor in the charging stand.

6Put Protective Razor Head Cap on razor to protect heads.

Note: If lotion build-up has occurred, remove Razor Head Assembly and soak for a few minutes under hot water or a degreasing liquid (e.g. alcohol). Be sure to thoroughly rinse Razor Head Assembly under tap water before using razor.

Razor Head Assembly: Once A Month

Do not mix up the cutters and combs as the shaving performance may be adversely affected for several weeks before optimal shaving performance is restored.

1Turn razor OFF.

1 C 2 Remove Razor Head Assembly from razor by pulling Razor Head Assembly straight up from razor.

0C 3 Using your thumb and forefinger turn the razor head clockwise and lift the comb off of Razor Head Assembly.

4Remove and clean one set of cutters and combs at a time.

ENGLISH 25

Do not clean more than one cutter and comb at a time, since they are all matching sets. If you accidentally interchange the cutters and combs, it could take several weeks before optimal shaving performance is restored.

5Separate the cutter from the comb and clean with a small brush or rinse clean under hot water.

6Replace the cutter back onto the Razor Head Assembly making sure the blades are pointing upwards.

C 7 Place the razor head comb back onto the Razor Head Assembly.

Be sure to replace the comb back into the original razor head before cleaning the next set.

C8 Turn the razor head counterclockwise until it locks into place.

9 Repeat the process for the other two sets of cutters and combs.

C 10 Replace Razor Head Assembly back on razor and push down (you will hear a

click).

The Razor Head Assembly will only fit correctly in one position on razor. Make sure to align the 2 shaving lotion dispensing holes on the Razor Head Assembly with the 2 shaving lotion tubes on the razor.