26ENGLISH
Trimmer:After Each Use
1Press the on/off button to turn razor ON.
2Rinse trimmer under hot tap water for at least 30 seconds.
3Turn razor OFF and shake off excess water.
4Lubricate trimmer teeth twice a year with one drop of mineral oil.
5Remove trimmer and put it back into the trimmer storage compartment on the charging stand.
6Replace Razor Head Assembly back on the razor until it clicks into position.
Replacing Cartridges
◗For hygienic reasons, it is recommended to replace the shaving conditioner cartridge each time you start a new Shaving Conditioner bottle.
◗A new empty cartridge is supplied with each new NIVEA FOR MEN Shaving Conditioner bottle (Model HS800).
ENGLISH 27
Shaving Conditioner Cartridge
C1 Remove the shaving conditioner cartridge 
from the back of razor.
| C |
| Insert the hinge at the top of the new |
|
| ||
2 | |||
|
|
| shaving conditioner cartridge into the slot |
in the rim of the razor back (1). Then press the bottom part of the cartridge with your thumb (2) to attach the cartridge to the razor. You will hear a ‘click’.
3The shaving conditioner cartridge is now ready to be filled (see ‘Filling Razor Cartridge’ section).
Replacing Razor Head Assembly
◗Replace entire Razor Head Assembly once a year for optimal shaving results.
◗Replace damaged or worn Razor Head Assembly with model HS85 Philips Norelco razor heads only.
C1 Remove Razor Head Assembly from razor by pulling Razor Head Assembly straight
