14ENGLISH

C 3

Hold trimmer as shown and move in

 

downward strokes with gentle pressure.

C 4

Close trimmer by pressing trimmer down.

5 Turn razor OFF.

Cleaning

Regular cleaning guarantees better shaving results.

Always switch Razor OFF, unplug and remove power cord before cleaning.

Never clean, remove or replace head assembly while motor is on.

Do not apply pressure to combs. Do not touch razor heads with hard objects as this may dent or damage precision-made slotted combs.

Do not use razor if combs are damaged or broken. Facial injury may occur.

Cleaning: Razor Heads

The easiest and most hygienic way to clean the razor heads is to rinse them after each use or at least once a week with hot water: Water from the tap should be on a hot setting, BUT BE CAREFUL TO TEST WATER FIRST SO AS NOT TO BURN OR SCALD HANDS.

ENGLISH 15

Regular cleaning guarantees better shaving

results.

Do not immerse razor in water.

C While rinsing razor heads,water may drip out of the base of razor.This is a normal occurence.

1Always turn razor OFF, unplug from outlet and remove cord from razor before

 

 

 

 

 

 

 

cleaning.

 

 

 

 

 

C

 

Press the Razor Head Release Button, flip

2

 

 

 

 

 

C

 

open the Razor Head Assembly.

 

 

 

 

 

 

Clean inside razor heads and hair chamber

 

 

 

 

 

 

 

 

 

 

 

3

 

 

 

 

 

 

 

 

 

 

C

 

by running under hot water.

 

 

 

 

 

 

Clean outside of Razor Head Assembly by

 

 

 

 

 

 

 

 

 

 

 

 

4

 

 

 

 

 

 

 

 

 

 

 

 

running under hot water.

 

 

 

 

 

 

 

Close the Razor Head Assembly and shake

5

 

 

 

 

 

C

 

off excess water.

 

 

 

 

 

 

Open Razor Head assembly again and

 

 

 

 

 

6

 

 

 

 

 

 

 

leave open to air dry.

NOTE: Do not wipe or dry the shaving heads with a towel or tissue.This could damage the shaving heads.

Page 8
Image 8
Philips 8138XL manual Cleaning Razor Heads