14ENGLISH
Charging Razor with a Cord
C 1 Connect cord directly to razor and connect the charging plug into any 100V to 240V AC outlet. Use only the charging plug provided.
◗An adaptor plug may be necessary for charging plug usage in some foreign countries. Use an attachment plug adaptor of the proper
configuration for the power outlet.
The charging plug will automatically convert to work on 100V to 240V AC systems.
C ◗ As you charge razor, the bottom light on the display blinks red.After a few minutes, it will turn green and blink.As charging continues, more and more lights of the display meter will briefly blink green and light up to indicate what level of the batteries have been charged.
2 First time charging and recharging after |
|
full 4 hours. After initial charge, recharging |
requires 1 hour. A fully charged razor has a |
cordless shaving time of up to 17 days. |
◗ When batteries are fully charged, all the |
ENGLISH 15
Charging Razor with Jet Clean
System
C 1 | Connect the small plug to the Jet Clean |
| System. Connect the charging plug into any |
| 100V to 240VAC outlet. Use only the |
| charging plug provided. |
The razor holder automatically moves up to the | |
highest position. | |
C 2 | Remove protective razor head cap from |
| razor. |
C 3 | Place the razor head side down in the razor |
| holder so that the razor head fits into the |
| configuration shown inside the Jet Clean |
| System. Gently press the base of the razor |
| towards the back of the Jet Clean System |
| so that the razor base fits snugly in place. |
| Lock the razor into place by pushing the |
| lever down completely.The lever will not |
| lock down unless the razor has been |
| properly placed in the holder. Do not force |
| lever. |
‘lights’ in the display will light up green. A few |
hours after charging, all lights go out. |
C ◗ |
The charging light blinks to indicate the razor is being automatically (re)charged and will light up continuously when fully charged.