ENGLISH 17
C 5 Separate the cutter from the comb and
rinse clean under hot water.
C |
Do not clean more than one cutter and comb at a time, since they are all matching sets. If you accidentally interchange the cutters and combs, it
could take several weeks before optimal shaving
performance is restored.
6Replace the set back into the Razor Head Assembly so that the ‘wings’ on the comb fit within the brackets located towards the center of the assembly.
◗The set will only fit into the Razor Head Assembly if the ‘wings’ are between the brackets. Make sure that the two pointy edges of the head fit exactly into the recesses.
C |
7Repeat the process for the other two sets of cutters and combs.
8Replace the retaining frame.
9Press down and turn wheel clockwise until it locks into place.
10Place the Razor Head Assembly back on razor.
For optimum performance, razor cutters and combs should be cleaned in a degreasing liquid (e.g. Norelco Razor Cleaner, model RC1776, or rubbing alcohol) and then lubricated with Norelco Razor Lubricant, model AL80, or one
