8894_95XLDFUwspanish.qxd 5/28/04 10:21 AM Page 12
12ENGLISH
◗Low Battery Indicator C - The Numeric Display:
When the battery is running low, the plug symbol and the “0” will blink after you have turned the razor OFF. You will also hear a few short beeps. If this occurs while shaving, you should have enough power to complete your shave.
When you turn razor ON or OFF the display will come on for approximately 10 seconds.
C - The Blocks Display:
When the battery is running low, the plug symbol and red block will blink after you turn razor OFF and you will also hear a few short beeps.
When you turn razor OFF or ON the display will stay on for approximately 10 seconds.
C ◗ Demonstration Program
The razor has a
ENGLISH 13
C ◗ Cleaning Indicator
The blinking faucet symbol and the short beep will remind you that razor heads need to be cleaned.This happens approximately once a week (in the case of normal use).
C ◗ Replacement Head Indicator
Every year, depending on your shaving behavior, after turning the razor OFF, a few beeps are audible for 3 seconds and the replacement head symbol indicator as well as the word REPLACE will be visible. It will remain visible for 2 weeks to remind you that with new shaving heads you will guarantee yourself optimal shaving performance. After 1 week the beeps are audible for 5 seconds. After 2 weeks the beeps are audible for 10 seconds.
Charge Meter
◗Charge Meter monitors amount of remaining battery power and actual remaining shaving minutes available. “Minutes Left” is based on the amount of power consumed shaving per minute and is dependent upon your skin and beard type, whether you use
◗Initially your razor may need to go through 2 or 3 full charge/recharge cycles before “Minutes Left” indicator begins to display your accurate “Shaving Minutes Left.”