8894_95XLDFUwspanish.qxd 5/28/04 10:21 AM Page 14
14ENGLISH
◗The block display in the charge meter indicates how much power is left in the battery.
Charging Stand Clock
To set time
ENGLISH 15
C 2 | Remove battery cover and then use a flat- |
| bladed screwdriver to lift out the battery. |
C 3 | Replace battery with 1.5V button cell |
| watch battery, placing rounded side of |
C |
1 |
2 |
1
Turn clock module, located on underside of stand, counterclockwise to remove from stand.
battery into battery compartment, flat side |
(+) facing out. Replace battery cover. |
C |
2
Press small, left button to set correct time.
| C |
2 | 1 |
|
4Replace clock module into stand and turn clockwise to secure in place.
Before first use
| C |
2 | 1 |
|
3
Replace clock module into underside of stand.Turn clockwise to secure in place.
◗Charge the razor before you start using it (see ‘Charging’).
◗Remove any sticker or protective foil from the LED Display.
Important
To replace clock battery
C 1 | Turn clock module counterclockwise and |
| remove from stand. |
1 |
|
2 |
|
◗Only use the power plug and/or charging stand provided to charge the razor.
◗The charging plug transforms 100 – 240V AC to 12V DC.