IN-CAR CONNECTION
Only use the AY 3545 car |
|
voltage converter (4.5V/600mA, |
|
DC, positive pole to the centre |
|
pin) and the AY 3501 car |
|
adapter cassette. Any other |
|
product may damage the set. | 4,5 V DC |
1 Put the CD player on a |
|
horizontal, |
|
stable surface. Make sure it |
|
is a safe place, where the |
|
player is no danger or |
|
obstacle to the driver and passengers. |
|
2Connect the DC plug of the voltage converter to the 4.5V DC socket of the CD player (only for a 12V car battery, negative grounding).
3Insert the voltage converter into the cigarette lighter socket. If necessary, clean the cigarette lighter socket to obtain a good electrical contact.
4Turn down the volume and switch off the autoreverse function of your car radio cassette player.
5Connect the adapter cassette plug to the p LINE OUT socket of the CD player.
6Carefully insert the adapter cassette into the car radio’s cassette compartment.
7Make sure the cord does not hinder your driving.
8Start the CD player, set VOL E to position 8 and adjust the sound with the car radio controls.
•Always remove the voltage converter from the cigarette lighter socket when the CD player is not in use.
Notes: – Avoid excessive heat from the car heating or from direct sunlight (e.g. in a parked car in the summer).
–If your car radio has a LINE IN jack, it is best to use this jack for the car radio connection instead of the adapter cassette. Connect the signal lead to this LINE IN jack and to the p LINE OUT jack of the CD player.
English
19