RADIO
You can use this set solely as a radio!
1Adjust RADIO OFF • ON to ON to switch on the radio.
2 Select your waveband by adjusting the BAND switch.
3 Adjust TUNING to tune to your desired station.
4 Turn the VOLUME control to adjust the volume level.
5 Adjust RADIO OFF • ON to OFF to switch off the radio.
To improve reception:
FM: extend and position the pigtail for optimum reception.
AM: uses a
SETTING THE CLOCK AND ALARM TIMES
The time is displayed using the
IMPORTANT! To adjust the clock and alarm times accurately, always make sure you press the HR or MIN buttons separately and not simultaneously.
1Turn the clock control to SET TIME or SET ALARM to set the clock or alarm
time respectively.
2Press HR or MIN repeatedly or hold down on the respective button to adjust
the hours and minutes.
3Release HR or MIN when you reach the correct setting.
4After you have set both the hour and minutes, turn the clock control to CLOCK to run on clock time.
SELECTING THE ALARM MODE
GENERAL
If you wish to use the alarm, you must first set the alarm time first. You can choose from two different alarm modes to wake you up: by radio or buzzer.
• Select your choice of alarm mode by adjusting ALARM to RAD or BUZ.
