Clock memory backup

When a power failure occurs,the complete
clock radio will be switched off.When the
power supply returns,the time display shows
0:00 and you will need to reset the correct
time on the clock.
To retain the clock time and the set alar m
time(s) in the event of an AC power failure
or disconnection,insert a 9 volt batter y,typed
6F22 (not supplied) into the battery
compartment.This will act as a clock memory
backup.
When powered by the battery,the time will
not be illuminated on the clock display,and
operation of the alarms,FM/ MW radio and
CD are also impossible.As soon as the AC
power supply returns,the display will indicate
the correct time.
1Insert the battery into the battery
compartment for clock memory backup.
2Connect the power plug to the wall outlet.
•Replace the battery once a year,or as often
as necessary.
Batteries contain chemical substances,so
they should be disposed of properly.

Setting the clock

The clock uses 24-hour time format.
1Press and hold CLOCKuntil clock digit for
hour flashes.
➜It will exit the clock setting mode without
setting if there is 5-second inactivity.
2Press repeatedly,or hold down ∞/ §to
adjust the hours.
3Press CLOCK to confirm the hour setting.
➜The clock digits for minute flash.
4Press repeatedly,or hold down ∞/ §to
adjust the minutes.
5Press CLOCK to confirm the setting.
Standby power consumption
(clock mode) ........................1.5W

Radio

1Press POWERto switch on from standby.
➜The display lights up.
2Select RADIO source by pushing
CD•RADIO•BUZZERto RADIO
(located on the side panel).
➜“TUNER”is displayed.
3Push BAND to FM or MW to select
desired waveband.
4Turn TUNING to find your station.
5To adjust the sound, turn VOLUME.
6To view r adio information,press DISPLAY.
➜The current waveband and frequency will
be displayed for several seconds (See 2),
then it will switch back to clock display.
7To switch off r adio and back to standby,press
POWER.
➜The display lights off.
To improve reception:
FM:Extend and adjust the pigtail for optimum
reception.
MW:Uses a built-in antenna. Direct the
antenna by adjusting the position of
your unit.
Clock Radio