Philips AJ5300D Product information, Set sleep timer, Adjust display brightness, Specifications

2 Press AL1/AL2 repeatedly to activate or deactivate the alarm timer.

»»[AL1] or [AL2] is displayed if the alarm timer is on and disappears if it is off.

•To stop the ringing alarm, press the corresponding AL1/AL2.

»»The alarm repeats ringing for the next day.

Snooze alarm

When alarm sounds, press SNOOZE.

»»The alarm snoozes and repeats ringing nine minutes later.

Set sleep timer

This clock radio can switch to standby mode automatically after a preset period.

Press SLEEP repeatedly to select the sleep timer period (in minutes).

»»When the sleep timer is activated, appears.

To deactivate the sleep timer, press SLEEP repeatedly until OFF appears.

Adjust display brightness

Press BRIGHTNESS repeatedly to select different brightness levels.

6Product information

Note

•• Product information is subject to change without prior notice.

Specifications

Amplifier

Rated Output Power	2 X 2 W RMS
Frequency Response	40-20000 Hz
Signal to Noise Ratio	>65 dB
Total Harmonic Distortion	<1%
Aux Input (MP3 link)	0.6 V RMS 10
	k ohm

Tuner (FM)

Tuning range	87 5-108
	MHz
Tuning grid	50 KHz
Sensitivity
- Mono, 26 dB S/N Ratio	<22 dBf
- Stereo, 46 dB S/N Ratio	<46 dBf
Search Selectivity	30 dBf

Speakers

Speaker Impedance	4 ohm
Sensitivity	>82 dB/m/W

EN 13