English | Controls | Power supply |
Supplied accessory
–1 X certified AC 7.5V adapter (Input:
Output: 7.5V 
250mA)
Controls (see 1)
1ALM 1/ ALM 2
–activates/confirms ALARM 1 /ALARM 2 time setting
–switches off the alarm
2RADIO ON/OFF
–switches the radio on/off
–switches the set on or to standby
–stops the active buzzer or radio alarm for 24 hours
–switches off the sleep timer
3TIME SET
–activates/confirms clock/date setting
4 AUTO SCAN
–programs preset radio stations 5 DATE
–displays month and day information in standby mode
–changes display order between month and day during setting time
6RADIO•BUZ
–selects alarm mode: radio or buzzer
7 REPEAT ALARM/BRIGHTNESS
CONTROL
–pushes to switch off alarm for a
–changes the brightness of the display illumination
8LCD Display – shows the clock/ alarm time or radio and weather forecast information
9SLEEP/ALARM RESET
–switches off radio for timer mode
–adjusts timer options for radio playback
–stops the active buzzer or radio alarm for 24 hours
0PRESET +/-
–selects a preset radion station ! TUNING +/-
–tunes to radio stations
–adjusts clock / alarm time
@VOL– adjusts sound level
#Battery compartment – opens to insert 4 x 1.5V AAA batteries
$RESET
–press if the set / display does not react to operation of any button
%(ºC ºF) Slide Switch
–selects between Centigrade (ºC) or Fahrenheit (ºF) temperature unit display
^DC 7.5V
–socket for AC/DC 7.5V adapter & Pigtail – FM antenna to improve FM
reception
Power supply
Make sure you remove the plug from the set and wall outlet before inserting batteries.
Batteries (not supplied)
1Open the battery door and insert 4 batteries, typed AAA with the correct polarity as indi- cated by the "+" and
2Replace the battery door, making sure the batteries are firmly and correctly in place.The set is now ready to operate.
Batteries contain chemical substances, so they should be disposed of properly.
Mains Adapter.
Note: Remove the batteries before you
use the AC adapter.
1Connect the mains adapter to the set's DC 7.5V socket and to the power socket.
Helpful hints:
To avoid damage to the set, use only the adapter supplied!
The type plate is located on the bottom of the set.
This set complies with the radio interference requirements of the European Community.
