Illumination brightness, Low battery indication

Alarm

Sleep

4Press ALM 1/ALM 2 to confirm the setting.

➜AL1/AL2 icon and the minute digits flash. 5 Hold down or press TUNING +/- repeatedly

to adjust the minutes.

6Press ALM 1/ALM 2 to confirm the setting.

Helpful hints:

–In standby mode, press DATE to display month and day information. In radio mode, to display alarm time, press ALM 1/ALM 2.

–The currently displayed alarm time is the time for the bracketed (selected) AL1 or AL2 (See 4).

Selecting alarm mode (activating)

1Press RADIO ON/OFF to switch to standby.

2 Select your choice of alarm mode: either radio, or buzzer by using the RADIO•BUZ slider.

3 Press ALM 1/ALM 2 once or more to

display .

➜When alarm is activated, is displayed. (See 4).

•At the set alarm time, radio or buzzer will switch on automatically.

Switching off the alarm

There are three ways of switching off the alarm. Unless you choose to cancel the alarm completely, the DAILY ALARM RESET option will be automatically kept activated from the time your alarm first goes off.

call at the same time for the following day:

Daily alarm reset

If you want the alarm to be stopped immediately but also wish to repeat the alarm

1During the alarm call, press once SLEEP/ALARM RESET or RADIO ON/OFF.

Repeat alarm

This will repeat your alarm call at 9-minute intervals.

1During the alarm call, press

REPEAT ALARM/BRIGHTNESS CONTROL.

Switching off the alarm completely

Press once or more corresponding

ALM 1 or ALM 2 until disappears.

Sleep

The clock radio has a built-in sleep timer, which enables the set to be automatically switched off during radio playback after a set period of time.

Setting the sleep time

1During radio playback, set your timer by pressing repeatedly SLEEP until the desired timer option appears.

➜Selections are follows (time in minute)

10=20=30=60=90=120=OFF =10

2The set will turn off automatically at the selected time.

3To cancel the timer function, either press SLEEP once or more until “OFF” appears, or press RADIO ON/OFF to switch to standby.

➜“SLEEP” disappears when sleep function is cancelled.

Note:

–The sleep function does not affect your alarm time setting(s).