Clock | Digital tuner | Alarm |
Setting the clock and date (see 2)
The clock uses
1Press and hold TIME SET for 2 seconds. ➜ The digits for year flash.
2Hold down or press TUNING +/- repeatedly to adjust the time digits.
•When it comes to adjust month and day, you may press DATE to change the display order between month and day.
3Press TIME SET to confirm the setting.
➜The digits for month flashes.
4Repeat steps
Standby power consumption
(clock mode).........................................................1.5W
Digital tuner
Tuning to radio station
1Press RADIO ON/OFF to switch on the radio (FM only).
➜The radio station frequency and the wave- band will be displayed. (See 3).
2Press and hold TUNING +/- until the frequency in the display starts running.
➜The radio automatically tunes to a station of sufficient reception.
3Repeat step 2 if necessary until you find the desired station.
•To tune to a weak station, press TUNING +/- briefly and repeatedly until you have found optimal reception.
To improve reception:
FM: Extend and adjust the pigtail for optimum reception.
Programming radio stations
You can store up to a total of 10 radio sta- tions in the memory (10 FM), manually or automatically (Auto store).
Manual programming
1Tune to your desired station (see Tuning to radio stations).
2Press and hold PRESET +/- to activate pro- gramming.
➜ Display: PRSET flashes.
3Press PRESET +/- once or more to allocate a number from 1 to 10.
4Repeat steps
Helpful hints:
–You can erase a preset station by storing another frequency in its place.
Autostore
Autostore automatically starts programming radio stations from preset 1. Any previous presets e.g. manually programmed will be erased.
1In radio mode, press AUTO SCAN until the frequency in the display starts running.
➜ Available stations are programmed (FM). After all stations are stored, the first autostore preset station will then automatically play.
To listen to a preset or autostore station
Press the PRESET +/- buttons once or more until the desired preset station is dis- played.
Using the alarm
AJ210 allows you to simultaneously set two different alarms (ALARM 1 and ALARM 2 ) which can go off in the radio or buzzer mode. The clock time needs to be set correctly before using alarm.
Setting alarm time
1Press briefly ALM 1 or ALM 2 to display AL1 or AL2 icon.
2Press and hold ALM 1/ ALM 2 for two
seconds.
➜The hour digits flash.
3Hold down or press TUNING +/- repeatedly to adjust the hours.
