6 Other features
Set time
1Press 
to switch the docking system to standby mode.
2Press and hold SET TIME for two seconds.
»The hour and minute digits begin to blink.
3Press 
/ 
and 
/ 
repeatedly to set the hour and minute.
4Press SET TIME
» [12H] or [24H] begins to blink.
5Press 
/ 
to select 12/24 hour format.
6Press SET TIME
» The set time is displayed.
Set alarm timer
Set alarm
In standby mode, you can set two alarms to ring at different time.
Note
Make sure that you have set the clock correctly.
1Press and hold AL1/AL2 for two seconds to activate alarm setting mode.
»The hour and minute digits begin to blink.
2Press 
/ 
and 
/ 
repeatedly to set the hour and minute.
3Press AL1/AL2
Select alarm source
Note | English |
|
For alarm sound, you can select buzzer, your last listened radio chanel, or the latest played track in your
Adjust AL1/AL2 RADIO·BUZZ·DOCK
control to select alarm source for both alarms.
Note
If DOCK is selected as alarm source, make sure that you have docked your device into the docking system.
Activate/deactivate alarm timer
1Press AL1/AL2 to view alarm settings.
2Press AL1/AL2 again to activate or deactivate the alarm timer.
»The alarm icon appears if alarm timer is on and disappears if it is off.
To stop the ringing alarm, press the corresponding AL1/AL2.
»The alarm repeats ringing for the next day.
Snooze alarm
When alarm sounds, press SNOOZE.
»The alarm snoozes and repeats ringing nine minutes later.
Set sleep timer
This docking system can switch to standby mode automatically after a preset period. Press SLEEP repeatedly to select the sleep timer period (in minutes).
»When the sleep timer is activated, 
appears.
EN 23
