20ENGLISH
◗If the shaving unit becomes detached from the razor, you can easily reattach it.
◗You may also clean the hair chamber without water by using the supplied brush.
Extra-thorough Cleaning Method
Do not mix up the cutters and combs as the shaving performance may be adversely affected for several weeks before optimal shaving performance is restored.
1Turn razor OFF, remove the charging plug from the outlet and power cord from the razor.
C 2 Press the Razor Head Release Button to open the Razor Head Assembly.
| C 3 | Pull the shaving unit off the razor. |
2 | C 4 | Turn the lock counterclockwise to unlock |
| 1 | (1) and remove the retaining frame (2). |
ENGLISH 21
C 5 Remove and clean one set of cutters and combs at a time.
C 6 Separate the cutter from the comb and clean it with the brush supplied.
Do not clean more than one cutter and comb at a time, since they are all matching sets. If you accidentally interchange the cutters and combs, it could take several weeks before optimal shaving performance is restored.
C 7 Clean the inside and outside of the comb with the brush supplied.
For optimum performance, razor cutters and combs should be cleaned in a degreasing liquid (e.g. Philips Norelco Shaving Head Cleaning Spray, Model HQ110 or alcohol) and lubricated with one drop of mineral oil (in the center of the head). This helps prevent wear of the shaving heads.
C 8 Replace the set back into the Razor Head Assembly.
Make sure that the two pointy edges of the head fit exactly into the recesses.
9Repeat the process for the other two sets of cutters and combs.
