After Each UseTrimmer, Replacing the Razor Heads

22ENGLISH

10Replace the frame and turn the lock clockwise until it locks into place.

C 11	Insert the notch of the shaving unit into
1	the slot in the top of the razor (1) and
2	then close the shaving unit (2).
NOTE: If the shaving unit does not close smoothly,
make sure you inserted the shaving heads
properly and that the retaining frame is locked.

After Each Use:Trimmer

C 2	Push down spring-release trimmer switch.
C 3	Clean trimmer with the short-bristled side
	of the brush every time you use it. Brush
	up and down along the trimmer teeth.
C 4	Lubricate the trimmer teeth with one
	drop of mineral oil every 6 months.
5	Close trimmer by pressing trimmer down.

ENGLISH 23

◗Replace the razor heads once a year for optimal shaving results.

◗Replace damaged or worn razor heads with model HQ8 Philips Norelco razor heads only.

1Turn razor OFF, remove the charging plug from the outlet and power cord from the razor.

C 2	Press the Razor Head Release Button to
	open the Razor Head Assembly.
C 3	Pull the shaving unit off the razor.

2	C 4	Turn the lock counterclockwise to unlock

	1	(1) and remove the retaining frame (2).

5Remove the razor heads and place the new razor heads in the shaving unit.

C Make sure that the two pointy edges of the head fit exactly into the recesses.