18ENGLISH
Cleaning
◗Always clean your razor after each use.
◗Always switch razor OFF, unplug and remove power cord before cleaning.
◗Never clean, remove or replace head assembly while motor is on.
◗Do not apply pressure to combs. Do not touch razor heads with hard objects as this may dent or damage
◗Do not use razor if combs are damaged or broken. Facial injury may occur.
◗Do not use compressed air, abrasives, scourers or aggressive liquids such as gasoline or acetone to clean the razor.
Cleaning the Shaving Unit
The razor heads may be quickly cleaned after each use by rinsing with hot water:Water from the tap should be on a hot setting, BUT BE CAREFUL TO TEST WATER FIRST SO AS NOT TO BURN OR SCALD HANDS.
◗Regular cleaning guarantees better shaving results.
◗Do not immerse razor in water.
◗While rinsing razor heads, water may drip out of the base of razor.This is a normal occurrence.
|
|
|
|
|
|
| ENGLISH 19 |
|
|
|
|
|
|
| Always turn razor OFF, unplug from outlet |
1 | |||||||
|
|
| C |
| and remove power cord from razor. | ||
|
|
|
| Press the Razor Head Release Button to | |||
2 | |||||||
|
|
|
| C |
| open the Razor Head Assembly. | |
|
|
|
|
| Clean inside razor heads and hair chamber | ||
|
|
|
|
| |||
|
|
|
|
| |||
3 | |||||||
|
|
|
|
| C |
| by running under hot water. |
|
|
|
|
|
| Clean outside of Razor Head Assembly by | |
|
|
|
|
| |||
|
|
|
|
| |||
4 | |||||||
|
|
|
|
|
|
| running under hot water. |
|
|
|
|
|
|
| |
|
|
|
|
|
|
| |
|
|
|
|
|
|
| Close the Razor Head Assembly and shake |
5 | |||||||
|
|
|
|
|
|
| off excess water. |
Be careful not to hit the shaving unit against anything while shaking off excess water.
6Open Razor Head Assembly again and leave open to air dry.
NOTE: Do not wipe or dry the shaving heads with a towel or tissue.This could damage the shaving heads.
◗If you used foam or gel to shave, make sure to rinse all of it off to prevent residue
