Philips AV-HS300G Setup, SIG Mode Gain, Dviin, Mode Scal, Formt, Sync, Ouphs, SYS Hphs Vphs, Mask

4. Setting menu table

Menu	Submenu		Parameter 1	Parameter 2	Parameter 3
	Turn F1 to select.		Turn F2 to select.	Turn F3 to select.	Turn F4 to select.
SETUP	IN1–5	Parameter	SIG	MODE	GAIN
	1/15	Setting range	IN1 to 5	SDI	–30 to 30
				ANLG
		Default value	IN1 to 5	SDI	—
				ANLG	0
	DVIIN	Parameter	MODE	SCAL	—
	2/15	Setting range	DIG	NORM	—
			ANLG	FULL
		Default value	DIG	NORM	—
	FS	Parameter	SIG	FS	—
	3/15	Setting range	IN1 to 5	ON	—
				OFF
		Default value	IN1 to 5	ON	—
	FORMT	Parameter	MODE	—	—
	4/15	Setting range	1080/59i	—	EXEC (	)
			1080/50i
			720/59p
			720/50p
			480/59i
			576/50i
		Default value	1080/59i	—	—
	REF	Parameter	SYNC	GL	—
	5/15	Setting range	BBST		EXEC (	)
				—
			BBAD
			TRI
			INT
		Default value	BBST	—	—
	OUPHS	Parameter	SYS	HPHS	VPHS
	6/15	Setting range	0H	–1320 to 1319	–100 to 100
			1H
		Default value	1H	0	0
	IP	Setting range	Cursor movement	0 to 255
	7/15	Default value	192.168.0.10
	MASK	Setting range	Cursor movement	0 to 255
	8/15	Default value	255.255.255.0
	GW	Setting range	Cursor movement	0 to 255
	9/15	Default value	0.0.0.0
	MAC	Display only	12-digit address display
	10/15	Default value	—
	BUS	Parameter	MODE	—	—
	11/15	Setting range	A/B	—	—
			P/P (PGM/PST)
		Default value	P/P	—	—

45