Philips AV-HS300G 6. External interfaces

52

6. External interfaces

6-3. Tally connector

The tally connector comes with tally output, output enable, power supply or fan alarm output pins.

The output signals from the tally output pins are for lighting the tally lamps, and these outputs are open collector

outputs.

Pin assignment

Pin No. Signal name Input/output Description of signal

1 IN1 Open collector output Tally output of input video 1

2 IN2 Open collector output Tally output of input video 2

3IN3 Open collector output Tally output of input video 3

4 IN4 Open collector output Tally output of input video 4

5 IN5 Open collector output Tally output of input video 5

6 IN6 Open collector output Tally output of input video 6

7 ENABLE Input Enable signal of tally output

Open: Output; GND: no output

8 ALARM Open collector output Fan alarm or power supply alarm output

9 GROUND GROUND Ground

Pins 1 to 6 and pin 8 must satisfy the following conditions:

Dielectric strength: Max. DC 24 V

Current: Max. 50 mA

Example of tally connections

AV-HS300G (Max. voltage: 24V)

Tally LED

GROUND

(Max. current: 50mA)

Tally, Alarm output

(IN1 to 6, ALARM)

54321

6 7 8 9

Contents

Main indicates safety information. For CANADA CAUTION WARNING: CAUTION: Note: The rating plate (serial number plate) is on the bottom of the unit. WARNING: IMPORTANT SAFETY INSTRUCTIONS indicates safety information. Page Contents Description Features Precautions for use 1-1. Control panel 1-2. Crosspoint area PGM/A bus crosspoint switches [PGM/A 1 to 7] PST/B bus crosspoint switches [PST/B 1 to 7] 6 Source selector switches [SOURCE SELECT/AUX, KEY-S, KEY-F] 1-3. Wipe area 7 Wipe pattern selector switches [WIPE PATTERN / FUNC] Wipe direction selector switch [N N/R R] 9 [FUNC] switch Freeze status indicator LED 1-4. Transition area [BKGD] switch [KEY] switch KEY ON tally LED [MIX] switch 1-5. LCD menu area 1-6. Rear panel connections area 2-1. Transitions 2-1-1. Selecting the bus "# 2-1-2. Selecting the bus mode 11 Page 2-2. Wipe BODR 1/5 WIDT 0 SOFT 0 COLR WHT Page 2-3. Key 2-3-1. Selecting the key source Page Page 643 )6& 4"5 -6. EDGE 1/5 Page 2-4. Color background 2-5. Freezing the input signals 2-6. Frame memory 2-7. Preset memory 3&$- $-3 14.&. 4503 /0 &9&$ &/#- 14.&. 915 %4#- 3-1. Setting the input signals IN1-5 1/15 SIG IN1 MODE SDI GAIN - '6--"/-( %7**/ %*( 4$"- /03. Page 3-2. Setting the output signals 3-2-1. Types of output signals 3-2-2. Selecting the AUX signals 3-3. Selecting the video format '03.5 J &9&$ 3-4. Setting the crosspoints 3-4-2. Setting the crosspoint switching ' ' 91548 5*.( "/: 3-5. Setting the sync signals BBAD TRI INT - REF 5/15 SYNC BBST 3-6. Adjusting the output signal phase <Phase adjustment setup> AVDL Range: Range for automatic phase adjustment. 3-7. Network settings Page 3-8. Other settings 3-9. Status displays 3-10. Initialization Page Page Page Page Page Page Page Page <Transmitting images to the unit> <Transmitting images from the unit> 6. External interfaces 6-1. RS-422 connector 6-2. GPI connector 6. External interfaces 6-3. Tally connector 7. Connections Connections when implementing gen-lock (frame synchronizer OFF) AV-HS300G 7. Connections Connections when not implementing gen-lock (frame synchronizer ON) AV-HS300G Example where the optional HD analog board is used Optional HD analog board 8. Appearance Specifications and standard accessories Specifications Specifications and standard accessories Standard accessories Optional accessories Page Page Page Page Page Page Matsushita Electric Industrial Co., Ltd.