English | CONTROLS / POWER SUPPLY | POWER SUPPLY / GENERAL INFORMATION |
Controls ( see figure 1 )
1LINE OUT/p........3.5 mm headphone socket, socket to connect the player to another audio input of an additional appliance
2 | ∞ | skips and searches CD tracks backwards |
3 | 9 | stops CD play, clears a program or switches the player off |
4 | § | skips and searches CD tracks forwards |
5 | 2; | switches the player on, starts or pauses CD play |
6 PROG | programs tracks and reviews the program | |
7 MODE | selects the different playing possibilities: shuffle, | |
|
| shuffle repeat all, repeat, repeat all and SCAN |
8............................display
9 DBB | switches the bass enhancement on and off. This button also |
| switches acoustic feedback (the beep) on/off when it is |
| pressed for more than 2 seconds |
0 VOL −/+ | adjusts the volume |
! 4.5V DC | socket for external power supply |
@ OPEN 2 | opens the CD lid |
# ESP ON / |
|
POWER SAVE | to select between the battery powersave mode and |
| Electronic Skip Protection (ESP). ESP ensures continuous |
| CD playback regardless of vibrations and shocks |
$ OFF | switches RESUME and HOLD off |
RESUME | stores the last position of a CD track played |
HOLD | locks all buttons |
%............................typeplate
^............................battery compartment
&............................AAA battery door
Batteries (supplied or optionally available)
For convenience, this model is designed with 2 different detachable battery doors. This allows you to operate the player using 2 choices of battery size. You can use the following batteries with this
•alkaline batteries type AAA (LR03, UM4) or AA (LR6, UM3) preferably Philips.
Notes:– Old and new or different types of batteries should not be combined.
–Remove batteries if they are empty or if the player is not going to be used for a long time.
1 | Inserting AAA (LR03, UM4) or AY 3363 batteries | + | + |
Open the AAA battery door. | LR03/AAA | ||
|
| /UM4 | |
2 | Insert AAA batteries as shown onto the back of the | - |
|
| door. |
|
|
3 | Replace the | AAA (LR03, UM4) |
|
| set. |
| |
|
|
|
Average playing time of batteries under normal conditions
Battery type | ESP on | Power Save | |
Alkaline AA | 15 hours | 20 hours | |
Alkaline AAA |
| 7 hours | 9 hours |
Rechargeable | 3 hours | 5 hours | |
Batteries contain chemical substances, so they should be disposed of properly.
rechargeable
Recharging works only on players supplied with the rechargeable
Recharging the ECO-PLUS NiMH battery on board
1Insert the rechargeable
2Connect the mains adapter to the 4.5V DC socket of the player and then to the wall socket.
y 
is pulsing.
•Recharging stops after a maximum of 7 hours, or when you start playback.
3 When the battery is fully recharged, FULL appears in the display.
Notes: – It is normal for the batteries to become warm during recharging.
–If the batteries become too warm, recharging will be interrupted for approximately 30 minutes .
–To ensure proper recharging on board, take care that contacts are clean.
–Use only the
Handling instructions
•Recharging already charged or
•To avoid a short circuit, do not let the battery touch any metal object.
•If the battery becomes empty soon after recharging, then either its contacts are dirty or it has reached the end of its lifetime.
Mains adapter (supplied or optionally available)
Use only the AY 3170 adapter (4.5 V / 300 mA direct current, positive pole to the center pin). Any other product may damage the player.
1 Make sure the local voltage corresponds to the power | 4.5V DC |
| |
adapter’s voltage. |
|
Inserting AA (LR6, UM3) batteries
To double playback time, insert AA batteries into the battery compartment and use the AA marked battery door.
•Open the battery compartment and insert either 2 normal or alkaline batteries.
Battery indication
+ | - |
| - | + |
AA SIZE |
| |||
| LR6 | / UM3 |
|
|
AA (LR6, UM3)
2Connect the power adapter to the 4.5V DC socket of the player and to the wall socket.
Note: Always disconnect the adapter when you are not using it.
Environmental information
The approximate power level of your batteries is shown in the display. 
Battery full
Battery
Battery
Battery dead or empty. When the batteries are
dead or empty, the symbol 
flashes, bAtt is displayed, and the beep tone sounds repeatedly.
•All redundant packing material has been omitted. We have done our utmost to make the packaging easily separable into two mono materials: cardboard (box) and polyethylene (bags, protective foam sheet).
•Your set consists of materials which can be recycled if disassembled by a specialized company. Please observe the local regulations regarding the disposal of packing materials, exhausted batteries and old equipment.
