Playing a CD
This
3
9
4
4 
Selecting a track and searching
Selecting a track during playback
•Briefly press ° or ¤ once or several times to skip to the current, previous or next track.
1Push the OPEN 2 slider to open the player.
2Insert an audio CD, printed side up, by pressing the CD onto the hub.
3Close the player by pressing the lid down.
4Press 2; to switch the player on and start playback. yThe current track number and elapsed playing
time are displayed.
•You can pause playback by pressing 2;.
yThe time at which playback was paused starts flashing.
•You can continue playback by pressing 2; again.
5Press 9 to stop playback.
yThe total number of tracks and the total playing time of the CD are displayed.
6Press 9 again to switch the player off.
•To remove the CD, hold it by its edge and press the hub gently while lifting the CD.
VOL
4 | 4 |
|
9
E S P
E S P
yPlayback continues with the selected track, and |
|
the track’s number is displayed. | 4 |
| 4 |
| 9 |
Selecting a track when playback is stopped
1Briefly press ° or ¤ once or several times to select the desired track. The track number is displayed.
2Press 2; to start CD play.
yPlayback starts with the selected track.
Searching for a passage during playback
1Keep ° or ¤ pressed to find a particular passage in a backward or forward direction.
ySearching starts while playback continues at low volume. After 2 seconds the search speeds up.
2Release the button when you reach the desired passage. yPlayback continues from this position.
Notes: – If the player is in SCAN mode (see MODE chapter), searching is not possible.
–In shuffle, shuffle repeat all or repeat mode (see MODE chapter), or while playing a program, searching is only possible within the particular track.
Note: If there is no activity, the set will automatically switch off after a while to save energy.
