BASIC FUNCTIONS
DIGITAL TUNER
SWITCHING ON AND OFF
1.Press STANDBY ON y to switch on.
2.Press the Source selector once or more to select your desired function: CD, FM, MW, GAME AUX. (or press CD, FM, MW, AUX on the remote control)
3.Press STANDBY ON y to switch off.
Helpful Hints:
–The tone, sound settings, tuner presets and the volume level (up to a maximum volume level of VOL 20 ) will be retained in the set's memory.
ADJUSTING VOLUME AND SOUND (See 2)
•Adjust the volume with the VOLUME control.
= Display shows the volume level | and a |
number from |
|
MAX SOUND
To enhance the bass response: press MAX SOUND once or more to switch on / off.
=MAX
Helpful Hints:
–MAX SOUND can be used when you play FM, MW, CD and GAME AUX source.
–Some discs might be recorded in high modulation, which causes a distortion at high volume. If this occurs, deactivate MAX SOUND or reduce the volume.
EQUALIZER
1.To adjust the bass, mid and treble frequencies press EQUALIZER once or more;
2.Rotate VOLUME within 3 seconds to adjust each level.
= Display briefly shows | , | , or |
level |
| . |
Helpful Hints:
–EQUALIZER can be used during FM, MW, CD and GAME AUX source.
–To prevent sound interference the bass control options operate exclusively. You cannot combine the bass from EQUALIZER with MAX SOUND.
GAMESOUND
To adjust the game sound, press GAMESOUND once or more to select your option.
= Display briefly shows | , | , |
or |
|
|
.
Helpful Hints:
–GAMESOUND is only available when you play in GAME AUX source.
How to MUTE the sound
1.Press MUTE on the remote control to interrupt sound reproduction instantly.
=Playback continues without sound and the
display flashes | . |
2.To reactivate sound reproduction you can:
–press MUTE again;
–adjust the volume controls;
–change to another source.
Tuning to stations (See 3)
1.Press STANDBY ON y to on, then press Source selector once or more to select FM/MW (or press FM/MW on the remote control).
=Display: shows 
briefly followed by waveband, frequency, and preset station number if already stored.
2.Tuning to stations: you can tune to your stations manually or by automatic search tuning: Press down on ∞ or § ( 5 or 6 on the remote control) and release button when the frequency in the display starts running.
=The radio automatically tunes to a station of sufficient reception. Display shows 
during automatic tuning.
3.Repeat step 2 if necessary until you find the desired station.
•To tune to a weak station, press ∞ or § briefly and repeatedly until you have found optimal reception.
Helpful Hints:
To improve radio reception:
–For FM, extend, incline and turn the telescopic antenna. Reduce its length if the signal is too strong.
–For MW, the set uses a
Programming tuner stations:
You can store up to a total of 30 radio stations in the memory, manually or automatically (Autostore).
Autostore
Automatic programming will start from preset 1 or a chosen preset number. The set will only program sta- tions which are not in the memory already.
1.Press ALBUM/PRESET
Helpful Hints:
–If no tuner preset number is selected, default is preset 1 and all your presets will be erased.
2.Press PROG for 4 seconds or more to activate auto store programming.
= Display: 
is shown and available stations are programmed in order of waveband FM, followed by MW.
3.The first preset station will then be played after all stations are stored automatically.
Manual programming
1.Tune to your desired station (see Tuning to stations).
2.Press PROG to activate programming.
=Display: program flashes.
3.Press ALBUM/PRESET
4.Press PROG again to confirm.
=Display: shows the preset number, waveband and the frequency of the preset station.
This set complies with the radio interference requirements of the
European Union.
