MAINTENANCE & SAFETY
Helpful Hints:
–During normal playback, you can press PROGto
add a current track to your program list.
–appears if you press PROGand
there is no track selected.
–appears if you try to store more than 20
tracks.
Reviewing the program
•In the stop position, press and hold down PROG
for a while until the display shows all your stored
track numbers in sequence.
Helpful Hints:
–Display shows : NO PROG if there is no track
programmed.
Clearing a program
You can erase the contents of the memory by:
•Press
9
:
– Once, if in the stop position;
– Twice, during playback.
•Press STANDBY ON
y
;
•Select another sound source;
•open the CD door
=displayed briefly, and
program
disappears.
Playing with Gamesound (See 8)
1. Press
Source selector
once or more on the set to
select the GAMEAUX function (AUX on the
remote control)
=Display scrolls :
2. Connect your console to the cinches on the front of
the set AUDIO
( IN Left / Right)
and VIDEO (IN).
3. Press GAMESOUNDonce or more to select your
game sound option.
=Display briefly shows ,,
or .
Connecting other equipment to your system
Use the supplied video cable to connect the VIDEO
OUTterminal on the back of the set to VIDEO IN on
a TV or VCR for viewing or recording.
GAMESOUND MAINTENANCE & SAFETYSafety Information (See9)
•Place the set on a hard, flat and stable surface so
that the system does not tilt.
•Do not expose the set, batteries, CDs to humidity,
rain, sand or excessive heat caused by heating
equipment or direct sunlight.
•The apparatus shall not be exposed to
dripping or splashing.
•Adequate ventilation with a minimum gap of
15cm between the ventilation holes and surround-
ing surfaces is necessary to prevent heat build-
up.
•The ventilation should not be impeded by cover-
ing the ventilation openings with items, such as
newspapers, table-cloths, curtains, etc..
•No objects filled with liquids, such as vases, shall
be placed on the apparatus.
•No naked flame sources, such as lighted candles,
should be placed on the apparatus.
•The mechanical parts of the set contain
self-lubricating bearings and must not be oiled or
lubricated.
•To clean the set, use a dry cloth. Do not use any
cleaning agents containing alcohol,
ammonia, benzene or abrasives as these may
harm the housing.
CD player and disc handling (See9)
•If the CD player cannot read CDs correctly, use a
cleaning CD to clean the lens before taking the set
to repair.
•The lens of the CD player should never be touched!
•Sudden changes in the surrounding temperature
can cause condensation on the lens of your CD
player. Playing a CD is then not possible. Do not
attempt to clean the lens but leave the set in a
warm environment until the moisture evaporates.
•Always close the CD door to avoid dust on the lens.
•To clean the CD, wipe in a straight line from the
centre towards the edge using a soft, lint-free
cloth. Do not use cleaning agents as they may
damage the disc.
•Never write on a CD or attach any stickers to it.