TROUBLESHOOTING
No sound /power
–Volume not adjusted
•Adjust the VOLUME
–Power Cord not securely connected
•Connect the AC power cord properly
–Batteries flat / incorrectly inserted
•Insert (fresh) batteries correctly
–Headphones connected to the set
•Disconnect headphones
–Electrostatic discharge/interference
•Unplug the set. If batteries inserted, remove batteries
from the battery compartment. Press and hold
STANDBY ON y
for 10 seconds, then re-plug /
replace battery supply, and try activating the set again.
–CD contains non-audio files
•Press SEARCH ∞ or §. once or more to skip to
a CD audio track, instead of the data file
Poor sound quality in GAMEAUX mode
•Adjust the volume on the set or on your game
console
Severe radio hum or noise
–Electrical interference: set too close to TV, VCR or
computer
•Move the set to increase the distance
Remote control does not function properly
–Batteries flat/ incorrectly inserted
•Insert (fresh) batteries correctly
–Distance/ angle between the set too large
•Reduce the distance/ angle
Poor radio reception
–Weak radio signal
•FM/MW: Adjust the FM/MW telescopic aerial
indication
–CD-R(W) is blank/ not finalized
•Use a finalized CD-R(W)
indication
–No CD inserted
•Inserted a suitable disc
–CD badly scratched or dirty
•Replace/ clean CD, see Maintenance
–Laser lens steamed up
•Wait until lens has cleared
The CD skips tracks
–CD damaged or dirty
•Replace or clean CD
–shuffle or program is active
•Switch off shuffle / program
Sound skips during MP3 playback
–
MP3 file made at compression level exceeding
320kbps
•Use a lower compression level to record CD tracks
into MP3 format
–Disc damaged or dirty
•Replace or clean disc
Cannot find desired MP3 title
–Wrong file extension used and/ or file
name with unsuitable text characters used
•Make sure the file names are typed in
English text characters an that the MP3 files
end with .mp3