MP3/WMA/CD Player
Selecting a different track
•Press ∞/ § once or repeatedly until the
desired track number appears in the display. For
or more to select your album.
•In the pause/stop position, press 2; to start playback.
Finding a passage within a track
1During playback, press and hold ∞ or § .
➜The CD is played at high speed and with reduced volume.
2When you recognize the passage you want, release ∞ or § to resume normal playback.
Helpful hints:
–When your searching reaches the end of the last track, the CD goes to stop mode.
Programming track numbers
You may store up to 20 tracks in the desired sequence. If you like, store any track more than once.
1In the stop position, press PROG to activate programming.
➜Display: PROG and P01 flash. (See 5)
2Press ∞ or § to select your desired track number.
For
3Press PROG to store the desired track number.
➜Display: PROG and P02 flash for you to program the next track.
4Repeat steps 2 to 3 to select and store all desired tracks in this way.
➜If you attempt to store more than 20 tracks, no track can be selected and the display shows
5To play your program, press 2/;.
Helpful hints :
–When playback of your program comes to the stop position, your set will return to normal playback.To
Reviewing the program
In the stop position, press PROG repeatedly to see your stored tracks.
Erasing a program
You can erase the contents of the memory by:
–in the stop position, press PROG to enter program mode, and then press 9.
–selecting USB, RADIO or OFF;
–opening the CD door;
