POWER SUPPLY
9
Only use the AY 3170 or AY 3160 mains adapter
(4.5 V direct current, positive pole to the center
pin). Any other product may damage the set.
1Make sure the local voltage corresponds to the
adapter’s voltage.
2Connect the mains adapter to the 4.5V DC
socket of the player and to the wall socket.
Note: Always disconnect the adapter when you are not using it.
1Make sure you insert the rechargeable Ni-Cd battery pack AY 3361.
2Connect the mains adapter to the 4.5V DC socket of the player and to the wall
socket.
3If necessary press 9once or twice until the set is
switched off.
yais flashing, ChArGEis displayed.
• Recharging stops when you switch on the set or when 8 hours have passed by.
4When the battery pack is recharged fully, ais
shown and FULLis displayed.
Note: It is normal for the battery pack to become warm
during recharging.
Recharging the battery pack
Mains adapter (supplied or optionally available)
English
AZ7884/01.4 eng 6/21/00 5:42 PM Page 9