CD PLAYER | CASSETTE RECORDER |
English
Erasing a programme
You can erase the programme by:
– pressing STOP 9 once in the STOP position or twice during
| playback. The display shows ' | ' briefly. |
– | pressing the CD door open; |
|
– | switching to TUNER/TAPE source. |
|
CD player and CD handling
•If the CD player cannot read CDs correctly, use a commonly available cleaning CD to clean the lens before taking the set to repair. Other cleaning methods may destroy the lens.
•The lens of the CD player should never be touched!
•Sudden changes in the surrounding temperature can cause condensation to cloud over on the lens of your CD player. Playing a CD is then not possible. Do not attempt to clean the lens but leave the set in a warm environment until the moisture evaporates.
•Always keep the CD compartment closed to avoid dust on the lens.
•To take a CD out of its box, press the centre spindle while lifting the CD. Always pick up the CD by the edge and return the CD to its box after use to avoid scratching and dust.
•To clean the CD, wipe in a straight line from the centre towards the edge using a soft,
•Never write on a CD or attach any stickers to it.
PLAY•PAUSE
CD
PROGRAM
REPEAT
ALL
CD MODE
STOP
X
1
REMOTE
SENSOR
SEARCH
PROGRAM
PLAYING A CASSETTE
1.Select TAPE source.
™The display shows tAPE throughout tape operation. 2. Press STOP•OPEN 9/ to open the cassette door.
3. Insert a recorded cassette and close the cassette door.
4. Press PLAY 1 to start playback.
5. To interrupt playback, press PAUSE ;. To resume, press the key again.
6. By pressing SEARCH 5 or 6 on the set,fast winding of the tape is possible in both directions.
7. To stop the tape, press STOP•OPEN 9/.
– The keys are automatically released at the end of the tape and the tAPE indication goes out, except if PAUSE ; has been activated.
PLAY•PAUSE
CD
PROGRAM
REPEAT
ALL
1
REMOTE
SENSOR
10
