English

RECORDING

Recording from the radio

1.Tune to the desired radio station (See TUNING TO RADIO STATIONS).

2.Press STOP•OPEN 9/ to open the cassette door.

3.Insert a suitable cassette into the cassette deck and close the cassette door.

4.Press RECORD 0 to start recording.

•If you are recording from MW/LW stations, adjust the

BEAT CUT switch to eliminate possible whistle tones during

recording.

5.For brief interruptions, press PAUSE ;. To resume recording, press PAUSE ; again.

6.To stop recording, press STOP•OPEN 9/.

MAINTENANCE

1

PLAY•PAUSE

CD

REMOTE

PROGRAM

SENSOR

REPEAT

 

ALL

 

CD MODE

MAINTENANCE

Tape deck maintenance

To ensure quality recording and playback of the tape deck, clean parts A,B and C shown in the diagram below, after approx. 50 hours of operation, or on average once a month. Use a cotton bud slightly moistened with alcohol or a special head cleaning fluid to clean the deck.

1.Open the cassette door by pressing STOP•OPEN 9/.

2.Press PLAY 1 and clean the rubber pressure rollers C.

3.Press PAUSE ; and clean the magnetic heads A and also the capstan B .

4.After cleaning, press STOP•OPEN 9/.

Note: Cleaning of the heads can also be done by playing a cleaning cassette through once.

C B A A

Environmental information

All unnecessary packaging material has been omitted. We have done our utmost to make the packaging easy to separate into three mono-materials: cardboard (box), expandable polystyrene (buffer), polyethylene (bags, protective foam).

Your set consists of materials which can be recycled if disassembled by a specialized company. Please observe the local regulations regarding the disposal of packing materials, exhausted batteries and old equipment.

12