IN-CAR CONNECTION
In-car use (connections supplied or optionally available)
Only use the AY 3545 car voltage converter (4.5 V, DC, positive pole to the centre pin) and the AY 3501 car cassette adapter. Any other product may damage the set.
1Put the CD player on a
horizontal,
player is neither a danger
nor obstacle to the driver and passengers.
4,5 V DC
OF F •
R
E
SU
MEE
••
HOLD
LINE OUT/
English
2Connect the DC plug of the voltage converter to the 4.5V DC socket of the CD player (only for a 12 V car battery, negative grounding).
3Insert the voltage converter into the cigarette lighter socket. If necessary, clean the cigarette lighter socket to obtain a good electrical contact.
4Turn down the volume and connect the cassette adapter plug to the LINE OUT/p socket of the CD player.
5Carefully insert the cassette adapter into the car radio’s cassette compartment.
6Make sure the cord does not hinder your driving.
7Start the CD player, set VOL E to position 8 and adjust the sound with the car radio controls.
•Always remove the voltage converter from the cigarette lighter socket when the CD player is not in use.
Notes: – Avoid excessive heat from the car heating or from direct sunlight (e.g. in a parked car in the summer).
–If your car radio has a LINE IN socket, it is better to use it for the car radio connection instead of the cassette adapter. Connect the signal lead to this LINE IN socket and to the LINE OUT/p socket of the CD player.
25
