Radio play, Tuning to radio stations manually | Philips AZT9240

RADIO

English

Radio play

You can tune to any FM or MW (or AM) station
automatically or manually. Stereo stations are indicated
by ST.	ET
	·
	K

1Press RADIO·BAND to switch the radio on.

2Press RADIO·BAND if necessary repeatedly to select the desired waveband.

y FM 1, FM 2, FM 3, FM 4 or MW (or AM) is shown.

PROGRAM

RADIO·BAND

Tuning to radio stations automatically

1Keep 3 or 4 pressed for at least 1 second.

y The radio tunes to a station with sufficient strength and radio play starts.

A (for “automatic search”) and the current waveband and frequency are displayed.

2Repeat searching until you find the desired radio station.

Tuning to radio stations manually

1Keep 3 or 4 pressed.

2Release 3 or 4, then briefly press 3 or 4 again when you are close to the desired frequency.

3Briefly press 3 or 4 repeatedly until you reach the

desired frequency.

y Radio play starts. The current waveband and frequency are displayed.

•To switch from radio play to CD play press 2;.

•Press 9 to switch the radio off.

Note: In case of interferences in stereo mode press ·MODE to switch to mono.

20

Image 17

Philips AZT9240 Radio play, Tuning to radio stations automatically, Tuning to radio stations manually

Contents

AZT9240 ESP Locks all buttons CONTROLS, refer to the illustration on Quick Start Battery indication Power SupplyBattery type ESP on ESP off Batteries supplied or optionally available Recharging the ECO-PLUS NiMH batteries on board Rechargeable ECO-PLUS NiMH battery handlingRechargeable ECO-PLUS NiMH batteries AY 3362 only Environmental information Power SUPPLY/HEADPHONESMains adapter supplied or optionally available Belt Clip not on all versions CD player and CD handling Headphones HE 545 or HLUse your head when using headphones Playing a CD CD PlayTime are displayed You can pause playback by pressing Volume adjustment Volume and bassBass adjustment Playback information Selecting a track when playback is stopped FeaturesSelecting a track and searching Selecting a track during playback Clearing the program Programming track numbers Resume is shown Press 9 whenever you want to stop playback Where you have stoppedStoring the last position played Resume Locking all buttons Hold ESP Playback starts in the chosen mode after 2 seconds Selecting different playing possibilities Mode Tuning to radio stations manually Tuning to radio stations automaticallyRadio Radio play Antennas Tuning to a stored radio stationStoring radio stations You can store up to 30 radio stations Clock Time setting Is shown and the alarm time is displayed for 5 seconds Alarm ClockAlarm time setting Alarm activation/deactivation In-car use connections supplied or optionally available IN-CAR ConnectionPut the CD player on a Player is neither a danger Problem Possible cause Solution Troubleshooting Time settings Alarm doesNo sound or Not work