Philips BB-HCA10CE manual Specifications, Operating +0 C to +40 C, Weight About 900 g

Models: BB-HCA10CE

1 36
Download 36 pages 36.95 Kb
Page 5
Image 5

9.Attach the connector cover (included) and connect the necessary cables to the camera.

Align the “ ” of the connector cover with the center of the recessed area of the bracket.

Cut spaces in the connector cover to make room for the cables that will be connected to the camera. Cut along the perforated lines.

Recessed area

10.Attach the camera to the bracket in 3 places using screw B (included).

Align the arrows on the ceiling plate (included with the camera) and the bracket when attaching the camera.

Ceiling plate arrow

Camera direction

 

11.Secure the ceiling mounting cover (included) to the bracket.

1Pass the safety wire through the ceiling mounting cover as shown.

2Align the “ ” marks on the rear of the camera and on the ceiling mounting cover.

3Turn the ceiling mounting cover clockwise until the “ ” mark on the rear of the camera and the “” mark on the ceiling mounting cover are aligned as shown.

Be careful not to nip the cables, cords, etc.

To remove the ceiling mounting cover, turn it counterclockwise until the “ ” mark on the rear of the camera and on the ceiling mounting cover are aligned, then lower the ceiling mounting cover.

12.Secure the safety wire to the ceiling.

Secure the bracket’s safety wire first, using screw A and the washer (included with the bracket), then secure the camera’s safety wire, using screw A and washer A (both included with the camera).

Secure the safety wires to the ceiling about 160 mm from the center of the camera.

Do not drive the screws into a soft material. Drive the screws into a secure, 25 mm thick area of the ceiling, such as a crossbeam, otherwise the bracket and the camera may fall. If there is no crossbeam, place a board on the other side of the ceiling to make sure the bracket and the camera are securely mounted.

Washer

Washer A

(Inside diameter:

(Inside diameter: 4.0 mm)

4.0 mm)

Screw A

Screw A

(Length: 20 mm,

(Length: 20 mm,

Body diameter: 4.0 mm)

Body diameter: 4.0 mm)

Specifications

Operating

+0 °C to +40 °C

temperature

 

 

 

Dimension

About 270 mm × 77.5 mm × 270 mm

(W×H×D)

 

 

 

Weight

About 900 g

 

 

English

5

Page 5
Image 5
Philips BB-HCA10CE manual Specifications, Operating +0 C to +40 C, Weight About 900 g