Philips BDL4635E/00 user manual Power Indicator, Using Power Management, Picture Size

User Manual BDL4635E

Power Indicator

	Status
Power ON	Green
Power OFF	Red
Power Standby when	Red On
“SCHEDULE” is enable	Green Blinking
Power Standby	Red, Green
Diagnosis	Red Blinking
(Detecting failure)	* See troubleshooting

Using Power Management

The LCD monitor follows the VESA approved DPM Power Management function.

The power management function is an energy saving function that automatically reduces the power consumption of the display when the keyboard or the mouse has not been used for a certain period.

The power management feature on the LCD monitor has been set to the “ON” mode. This allows the system to enter a Power Saving Mode when no signal is applied. This could potentially increase the life and decrease the power consumption of the LCD monitor.

Display Signal of Video Source Setting to [VIDEO]

Use the input button on the front panel or the VIDEO SOURCE button on the remote control to set video source to [VIDEO].

Use the COLOR SYSTEM OSD menu to select [AUTO], [NTSC], [PAL], [SECAM], [PAL60], [4.43NTSC], according to your video format.

Picture Size

HDMI 1, 2, PC-A		FULL		NORMAL	CUSTOM
					REAL
CVI , VIDEO		FULL		NORMAL	DYNAMIC
			REAL		CUSTOM
Signal Type	NORMAL SIZE			Recommended Size
				NORMAL
4:3
				DYNAMIC
				FULL
Squeeze

NORMAL: Display with the input signal aspect ratio from PC signal, or display in 4:3 aspect ratio at CVI or VIDEO signal.

FULL: Display in the entire screen.

DYNAMIC: Expand 4:3 pictures to the entire screen with non-linearity. (Some round image might be cut by expansion.)

CUSTOM (ZOOM): Images can be expanded beyond the active display area. The image which is outside of the active display area would not be shown.

REAL: Image will be displayed for one by one pixel.

ZOOM

ZOOM

24