Philips BDL5231V user manual Terminal Panel, External Speaker Terminal

User Manual BDL5231V/00

Terminal Panel

EXTERNAL CONTROL (mini D-Sub 9 pin)

This is for serial connection when multiple BDL5231V monitors are connected. To achieve remote management through RS232 commands (refer to the RS232 remote control user manual), connect the RS-232C OUT connector from a computer or from a different BDL5231V monitor to the RS-232C IN connector from your BDL5231V monitor. The same RS-232C commands can be looped through by connecting the RS-232C OUT of this monitor to the next RS-232C IN.

AUDIO IN 1, 2, 3

To input audio signal from external equipment such as a computer,VCR or DVD player.

AUDIO OUT

To output the audio signal from the AUDIO IN 1,2 and 3 jack or HDMI.

EXTERNAL SPEAKER TERMINAL

To output the audio signal to external speakers from AUDIO IN 1, 2, 3 jack or HDMI.

AC IN connector

To connect with the supplied power cord.

HDMI IN

To input digital video/audio signals from a digital equipment or computer.

DVI-D IN

To input digital video signals from a digital equipment or computer.

PC-AIN (mini D-Sub 15 pin)

To input analog RGB signals from a computer or other RGB equipment.

RGB OUT (mini D-Sub 15 pin)

To output the signal from PC-A IN.

CVI IN [Y, Pb/Cb, Pr/Cr] (BNC)

To connect an equipment such as a DVD player, HDTV device, or Laser disc player.

VIDEO IN/OUT

VIDEO IN connector (BNC and RCA): To input a composite video signal. Note that BNC and RCA are not available at the same time.

VIDEO OUT connector (BNC): To output the composite video signal from VIDEO IN connector.

S-VIDEO IN connector (MINI DIN 4 pin): To input the S-video (Y/C separate signal).

9