BDL6520EL
to enter the following values manually. When finished, press [SET] button to store and save the chosen values.
•IP address
•Subnet mask
•Default gateway
•Login user name (The default user name is {admin})
•Login password (The default password is {0000})
Configuration reset
Reset all settings in Configuration1 menu to the factory preset values.
Factory reset
Reset all settings in the OSD menus of {Picture}, {Screen}, {Audio}, {PIP}, {Configuration1}, {Configuration2}, and {Advanced option} to the factory preset values.
Press [
] or [ ] button to select [Reset], and then press [SET] button to do the reset.
Factory reset
OSD
Adjust the horizontal position of the OSD menu.
OSD
Adjust the vertical position of the OSD menu.
Monitor information
Shows information about your display, including model number, serial number, operating hours and software version.
Monitor information
Model name: | BDL6520EL |
Serial no: |
|
Operation hours: | 0 H 3M |
SW Version: | VER 0.204 |
4.2.7. Advanced option menu
Cancel |
| Reset |
|
|
|
4.2.6. Configuration2 menu
Picture
Screen
Audio
PIP
Configuration1
Input resolution Black level expansion Gamma selection Scan mode
Scan conversion Film mode
IR control Keyboard control
Picture
Screen
Audio
PIP
OSD turn off
Information OSD
Off timer
OSD
OSD
Monitor information
Configuration2
Advanced option
Tiling
Heat status Date and time
Configuration1
Input resolution
Set the resolution of the VGA input.This is only required when the
Configuration2
Advanced option
OSD turn off
Set the period of time the OSD
The options are: {5 ~ 120} seconds.
Information OSD
Set the period of time the information OSD is displayed on the upper right corner of the screen.The information OSD will display when input signal is changed.
The information OSD will remain on the screen with {Off} selection. The options are: {1 ~ 60} seconds.
Off Timer
Set the display to turn itself off to standby mode within an amount of time specified.
The options are: {Off, 1 ~ 24} hours from currrent time.
NOTE: When the “Off timer” is activated, the “Schedule” settings will be disabled.
display is unable to detect the VGA input resolution correctly. NOTE: This item is functional for VGA input only.
The options are:
•{1024x768 / 1280x768 / 1360x768 / 1366x768}
•{1400x1050 / 1680x1050}
•{1600x1200 / 1920x1200}
•{Auto}: Determines the resolution automatically.
The selected settings will become effective after turning off the power and turning it on again.
Black level expansion
This feature offers deeper blacks for an even better image quality.
The options are: {Off} / {Low} / {Medium} / {High}.
NOTE: This item is functional for Video mode input only.
Gamma selection
Gamma is what controls the overall brightness of an image. Images which are not corrected properly can appear too white or too dark, so controlling the gamma properly can have a huge influence on the overall picture quality of your display.
The options are: {Native} / {2.2} / {2.4} / {S gamma}.
Scan mode
Change the display area of the image.
18
