Philips BDL6520 user manual Parts and Functions, Control Panel

BDL6520EL

2.Parts and Functions

2.1.Control Panel

9

MUTE INPUT

MENU

1 2 3 4 5 6 7 8

1[POWER] button

Press to turn the display on or put the display to standby.

2[MUTE] button

Press to switch the audio mute ON/OFF.

NOTE: “Keyboard Control Lock Mode” This function completely

disables the access to all Keyboard Control functions.To enable or disable the keyboard control lock, press both [] and [ ] buttons and hold down continuously for more than 3 (three) seconds.

3[INPUT] button

Press to select the input source.

4[] button

Press to increase the adjustment while OSD menu is on, or increase the audio output level while OSD menu is off.

• Used as [SET] button in the On-Screen-Display menu,

5[ ] button

Press to decrease the adjustment while OSD menu is on, or decrease the audio output level while OSD menu is off.

6[] button

Press to move the highlight bar up to adjust the selected item while OSD menu is on.

7[] button

Press to move the highlight bar down to adjust the selected item while OSD menu is on.

8[MENU] button

Press to return to previous menu while OSD menu is on, or to activate the OSD menu when OSD menu is off.

9Remote control sensor and power status indicator

•Receives command signals from the remote control.

•Indicates the operating status of the display without OPS: -- Lights green when the display is turned on

-- Lights red when the display is in standby mode -- Lights amber when the display enters APM mode

-- When {SCHEDULE} is enabled, the light blinks green and red

-- If the light blinks red, it indicates that a failure has been detected

-- Lights off when the main power of the display is turned off

•Indicates the operating status of the display with OPS: -- Lights green when the display is on, but the OPS is off -- Lights blue when the display and the OPS is on

-- Lights red when the display is in standby mode -- Lights amber when the display enters APM mode

-- When {SCHEDULE} is enabled, the light blinks green and red

-- If the light blinks red, it indicates that a failure has been detected

-- Lights off when the main power of the display is turned off

4